Graphic Products Duralabel Pro 300 Driver

Most Popular

This may be caused by an incompatible ribbon, or by incorrect instructions that Toro is trying to follow. We just need to roll the ribbon into a fresh, unwrinkled area. The ribbon should roll down the back of the back roller, forward through the wide-open part of the printer, up across the metal print head, and onto the front of the front roller.

We offer free support for the lifetime of our printers. Finally, it should reach over the dark gray rubber roller. After passing the guides, the supply should reach forward over the black rubber roller near the front of the printer. Redefine your visual communication program with LabelForge and DuraSuite labeling software. It's the jack of all trades.

DriverIdentifier Tool

That tells us which version of the printer you have. Next, you'll choose the sensor mode, to match the type of label stock you're using.

Call Us Toll Free from the U. Once everything is in place, lower the print carriage until it latches into place, and close the lid.

My reseller's company name is. This will open a window for the basic print settings.

Downloaded fonts typically print faster, because they can be rendered directly by the printer. The light will change to solid green.

The roll of label stock should have a pair of black plastic end caps, and the label stock should unroll from the top of the roll. Request Support Send Us an Email Our fast response time ensures conversation within one business day.

DriverIdentifier ToolGraphic Products

In the lower left corner of this window, click on Display. Automation Edition Combine forms, actions and system integrations to build a powerful automated printing solution. The printer is not yet ready to print.

Graphic Products Duralabel Pro Driver Download

Toro may print out the labels that you were waiting for, too. Go to the Options tab, and look at the Printer Options section.

Contact Have a question not answered yet? Go to the Stock tab, and look at the Type drop-down menu. Check the Supply Loading Turn off the printer using the switch in the back, near the black power cord, and open the printer as if you were going to change the printing ribbon.

Please check our selection of online videosor graphic products duralabel pro our support team for help. Cleaning the DuraLabel Catalyst. How to Clean DuraLabel Bronco. DuraLabel Toro Software Navigation. Download quick start guides, printer manuals, software, printer drivers, ae1200 driver for windows 7 and product catalogs.

Both software packages are pre-installed to keep your facility safe, efficient, and compliant. If the same thing happens again, then please contact our support team for help. Also clean the green guides in the lower part of the printer, where your label stock is fed through. It should be set to Thermal Transfer.

If the same thing happens again, please contact our support team for help. If the cartridge seems to be in place, but the locking knob will not turn, the cartridge may need more pressure to fit down correctly. Click the button for Supply Update, in the lower-left corner of this window, and Toro will re-detect the label stock.

Printer Support - Drivers Manuals & More

If you are still unable to print normally, please contact our support team for help. This is usually a very quick fix, especially if the label stock was changed while the printer was still on. Turn off the Toro, wait about five seconds, and turn it back on.

Usually, this is because the print head mechanism is not latched down all the way. Turn off the printer using the switch in the back, near the black power cord, and open the printer as if you were going to change all the supplies. If you have run out of label stock, load a new roll. Lower the print carriage until it latches into place, and close the lid. Navigating the User Gallery with Echo.

This can be caused by dust in the printer, on the print head itself or on the label stock, especially if your printer or supplies are stored in the open. Check the Supply Loading Turn off the printer using the switch in the back, near the black power cord, and open the printer as if you were going to change all the supplies. Loading Supply in the DuraLabel Lobo. The supply cartridge may catch in the system during loading. If you are still unable to print properly, please contact our support team for help.

Press Setuphighlight Set Defaultsand press the right arrow key. Have a question not answered yet? At that point, turn off the printer, give it about ten seconds, and turn it back on again. We'll guide you to the solution.

It should unroll to feed beneath the white roller, and slide smoothly between the green guides as they hold it centered. The printer will do what it can, and then stop.

DuraLabel PRO Official DuraLabel Store

Check the Driver Settings After checking the supply loading, minimize any open windows until you can see the Toro home screen, and click on the printer icon in the taskbar. Drivers with status monitoring can report printer and print job status to the Windows Spooler and other Windows applications, including BarTender. Close the printer, turn it back on and wait for the solid green light, and try printing again. Minimize any open windows until you can see the Toro home screen, and click on the printer icon in the taskbar.

The printer is looking to cut on a mark, but can't find it. Choose between online chat, request an email, or simply give us a call to speak with a knowledgeable customer support specialist. After the label is cut, the light will change to solid green.